Product Overview
The Medica EasyRA® Clinical Chemistry Analyzer is a fully automated, true random-access benchtop system designed for small to medium-sized clinical laboratories. Its intuitive interface, automated reagent management and accessible maintenance components help simplify routine chemistry testing.
The EasyRA provides a photometric analysis rate of up to 300 tests per hour. Patient-result throughput is listed at up to 240 photometric results per hour and up to 480 results per hour when photometric testing is combined with the integrated ISE module. Typical STAT results are available in less than eight minutes, depending on the selected assays.
Jant catalog number MEC10405 is listed as an EasyRA configuration with LIS connectivity, ISE and printer. Contact Jant Pharmacal to confirm the included components, current software, assay menu, installation requirements, training and service coverage for your laboratory.
Up to 300 Tests per Hour
A 12-second photometric cycle supports an analysis rate of up to 300 tests per hour, with actual throughput dependent on the selected workload.
24 Samples and 24 Reagents
The system accommodates 24 sample positions per sample ring and 24 onboard reagent positions for flexible routine and STAT testing.
LIS, ISE and Printer
The Jant-listed MEC10405 configuration combines LIS connectivity, an ISE module and a printer in one benchtop laboratory system.
EasyRA Features
- Fully automated, true random-access clinical chemistry analyzer
- Photometric analysis rate of up to 300 tests per hour
- Up to 240 photometric patient results per hour
- Up to 480 patient results per hour with integrated ISE
- Typical STAT results in less than eight minutes
- 24 sample positions per sample ring
- Up to five user-defined STAT positions
- 24 onboard reagent positions
- Ready-to-use EasyRA reagent wedges with RFID identification
- Automatic reagent setup and inventory tracking
- Support for up to six user-defined open channels
- Onboard calibration and quality-control management
- Levey-Jennings quality-control charts
- Accessible slide-out maintenance drawer
- Local or network printing
- LIS connectivity in the Jant-listed configuration
Designed to Simplify the Laboratory Workflow
Load
Load primary tubes or sample cups, place compatible reagent wedges in the reagent area and prepare the worklist through the operator interface.
Run
RFID technology identifies EasyRA reagent information and supports automatic setup, usage tracking and inventory management.
Review
Review patient results, calibration information, QC data and analyzer status through the software, printer and configured LIS connection.
Flexible Clinical Chemistry Test Menu
The current EasyRA menu covers routine chemistry, cardiac-risk testing, enzymes, electrolytes, anemia assays and selected urine chemistry applications. Consult the current test menu and individual reagent instructions for approved specimen types, performance information and limitations.
Routine Chemistry
- Albumin
- Direct and Total Bilirubin
- Calcium
- Creatinine
- Glucose
- Magnesium
- Total Protein
- Urea Nitrogen
- Uric Acid
Enzymes and Cardiac Risk
- Alkaline Phosphatase
- ALT and AST
- Amylase
- Creatine Kinase and CK-MB
- GGT
- LDH
- Lipase
- HDL and LDL Cholesterol
- Cholesterol and Triglycerides
Additional Testing
- Carbon Dioxide
- Sodium
- Potassium
- Chloride
- Iron and TIBC
- C-Reactive Protein
- Lithium
- Urine Creatinine
- Calculated Results and Ratios
For the current assay offering, reagent availability and compatible toxicology applications, contact Jant Pharmacal before selecting a system configuration.
Build Your EasyRA Testing Workflow
Jant can help your laboratory evaluate the EasyRA analyzer, EasyRA-specific reagents and compatible open-channel options.
Medica EasyRA Reagents
Explore EasyRA reagent options for routine clinical chemistry testing. Contact Jant to confirm the current assay menu, packaging and availability.
Chemistry Open-Channel Reagents
Review Jant’s broader open-channel chemistry reagent offering. Compatibility and laboratory validation requirements must be confirmed before use.
Technical Specifications
| System Type | Fully automated, true random-access clinical chemistry analyzer |
|---|---|
| Photometric Analysis Rate | Up to 300 tests per hour, based on a 12-second cycle time |
| Patient-Result Throughput | Up to 240 photometric results per hour; up to 480 results per hour with integrated ISE |
| ISE Throughput | Up to 240 ISE tests per hour for four ions |
| STAT Time | Typical results in less than eight minutes, depending on the assays performed |
| Sample Positions | 24 positions per sample ring; optional second sample ring; up to five user-defined STAT positions |
| Sample Containers | Sample cups or compatible primary tubes |
| Photometric Sample Volume | 2.0–25.0 µL, programmed in 0.1 µL increments |
| Reagent Positions | 24 onboard positions |
| Open Channels | Up to six user-defined channels |
| Analysis Types | Endpoint, enzymatic, rate, bichromatic, potentiometric, enzyme immunoassay and turbidimetric immunoassay |
| Reaction Time | 1–15 minutes |
| Wavelengths | 340, 405, 520, 550, 600, 660 and 700 nm |
| Quality Control | Two levels of controls with Levey-Jennings plots |
| Data Storage | 2,000 patient results and 56,000 test results, with archive and retrieval capability |
| Dimensions | 40 in W × 15 in H × 26 in D |
| Weight | Approximately 88 lb without reagents |
| Power | 100–240 VAC ±10%, 50–60 Hz |
| Jant Configuration | LIS connectivity, ISE and printer; confirm included components when requesting a quote |
Specifications are summarized from available manufacturer literature. Actual throughput varies according to the worklist, assay combination and system configuration. Confirm current specifications before purchase.
Important Product Information
- The EasyRA is a prescription in vitro diagnostic laboratory analyzer intended for professional use.
- Assay availability, intended use, specimen requirements, calibration, quality-control procedures and CLIA complexity vary by reagent.
- Review the current instructions for each reagent before testing patient specimens.
- Open-channel applications require appropriate compatibility review, programming, performance verification and laboratory validation.
- The MEC10405 configuration is listed by Jant as including LIS, ISE and printer. Confirm the complete configuration when requesting a quote.
- Current manufacturer labeling and the specifications supplied with the quoted system take precedence over summary information on this page.
Documentation and Resources
Review the product brochures and current test menu for system features, specifications and available EasyRA assays.
EasyRA Product Brochure — English EasyRA Product Brochure — Spanish EasyRA Test Menu — March 2026See the EasyRA Analyzer in Action
Frequently Asked Questions
The EasyRA is a fully automated, true random-access benchtop clinical chemistry analyzer designed for professional laboratory use. It combines photometric chemistry testing with configurable ISE, LIS and printing capabilities.
Jant currently lists MEC10405 as the EasyRA Analyzer with LIS, ISE and printer. Confirm the included computer, accessories, startup supplies, installation, training, warranty and service coverage when requesting a quote.
The current manufacturer brochure lists a photometric analysis rate of up to 300 tests per hour. It also lists up to 240 photometric patient results per hour and up to 480 patient results per hour when photometric testing is combined with ISE. Actual throughput varies by workload.
The manufacturer reports typical STAT results in less than eight minutes. Actual time depends on the tests ordered and the system’s current workload.
EasyRA reagent wedges use RFID technology to communicate reagent information to the analyzer. This supports automatic parameter setup, reagent-location identification, expiration-date tracking and inventory management.
The current manufacturer brochure lists up to six user-defined open channels. Compatibility, programming and validation requirements must be evaluated for each reagent and application before patient testing.
Yes. LIS connectivity is part of the Jant-listed MEC10405 configuration. Confirm the interface requirements and compatibility with your laboratory’s LIS during the system evaluation.
The March 2026 EasyRA test menu is available in the Documentation and Resources section above. Because assay availability can change, contact Jant to confirm current reagents and ordering information.
Yes. Jant Pharmacal can help review your testing volume, assay requirements, ISE needs, LIS connectivity, reagent usage and available system configuration. You can also request a complimentary ROI proposal.
Ordering Information
To request current availability, system configuration or a quote, call Jant Pharmacal at 800.676.5565
| Catalog Number | Description | Unit of Measurement |
|---|---|---|
| MEC10405 | Medica EasyRA Analyzer – LIS, ISE & Printer | Each |
Confirm included components, startup supplies, installation, training, warranty and service coverage when requesting a quote.